Set this parameter equal to the output frequency in increments. The output will always be printed at the last increment of each step unless FREQUENCY=0. The default is FREQUENCY=1. Set FREQUENCY=0 to suppress the output.

This parameter is relevant only at nodes where the TRANSFORM option has been used to define a local coordinate system.

Set GLOBAL=NO (default) to obtain printout of vector-valued nodal variables in the local directions.

Set GLOBAL=YES to obtain printout of vector-valued nodal variables in the global directions.

This parameter is useful only during eigenvalue extraction for natural frequencies (Natural frequency extraction), complex eigenvalue extraction (Complex eigenvalue extraction), and eigenvalue buckling estimation (Eigenvalue buckling prediction). Set this parameter equal to the highest mode number for which output is required.

The default value is LAST MODE=N, where N is the number of modes extracted. If the MODE parameter is used, the default value is LAST MODE=M, where M is the value of the MODE parameter.

This parameter is useful only during natural frequency extraction, complex eigenvalue extraction, and eigenvalue buckling estimation. Set this parameter equal to the first mode number for which output is required. The default is MODE=1. See also the LAST MODE parameter. When performing a FREQUENCY analysis, the normalization will follow the format set by the NORMALIZATION parameter. Otherwise, the normalization is such that the largest displacement component in the mode has a magnitude of 1.0.

Set this parameter equal to the name of the node set for which this output request is being made. If this parameter is omitted, the output will be printed for all of the nodes in the model.

Set SUMMARY=YES (default) to obtain a summary and the locations of the maximum and minimum values in each column of the table. Set SUMMARY=NO to suppress this summary.

Set TOTALS=YES to print the total of each column in the table. This is useful, for example, to sum reaction forces in a particular direction. The default is TOTALS=NO.